[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
debug ip pim
Syntax
The syntax differs for PIM Dense Mode and PIM Sparse
Mode.
PIM Dense Mode:
debug ip pim { pimLog [ severity { severityValue | severityNumber }
]
[ verbosity verbosityLevel ]
| switchState groupAddress sourceAddress |
dense-mode {
on | off } }
PIM Sparse Mode:
debug ip pim { pimLog [ severity { severityValue | severityNumber }
]
[ verbosity verbosityLevel ]
| switchState groupAddress sourceAddress |
sparse-mode
{ on | off | sg-state [ group groupAddress
[ source sourceAddress ] | rp rpAddress ] [ count ] } }
no debug ip pim pimLog
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Shows information about the selected variable.
The no version disables the display.
Options
-
pimLog—PIM log of interest;
one of the following options:
- autoRp-rcvd—Auto-RP packets received
- autoRP-sent—Auto-RP packets sent
- engineering—PIM engineering
- hellos-rcvd—PIM hello messages received
- hellos-sent—PIM hello messages sent
- packets—PIM packets received and sent
- packets-rcvd—PIM packets received
- packets-sent—PIM packets sent
- severity—Specifies the minimum severity of the log
messages displayed for the selected category; described either by
a descriptive term—severityValue—or
by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the
priority:
- emergency or 0—System unusable
- alert or 1—Immediate action
needed
- critical or 2—Critical condition
exists
- error or 3—Error condition
- warning or 4—Warning condition
- notice or 5—Normal but significant
condition
- info or 6—Informational message
- debug or 7—Debug message
-
verbosityLevel—Verbosity of
the log category's messages; can be any of the following:
- low—Terse
- medium—Moderate detail
- high—Verbose
-
switchState—Switches from
one type of tree to another
- rpt-switch—Switch from a shortest-path tree to a
shared path tree
- spt-switch—Switch from a shared-path tree to a shortest
path tree
-
groupAddress—IP address of
the multicast group
-
sourceAddress—IP address of
the multicast source
- on—Turns on the specified PIM mode on all virtual
routers
- off—Turns off the specified PIM mode on all virtual
routers
- sg-state—Displays information about the relationship
between a source, multicast group, and RP router
- rp—Displays information about the relationships
between sources, groups, and the specified RP router
-
rpAddress—Address of the RP
router
- count—Displays one of the following
- (with no optional keywords) number of relationships between
a source, multicast group, and RP router
- (with the group keyword) number
of sources associated with the multicast group for PIM sparse mode
- (with the source and group keywords) number of source-group pairs for PIM
sparse mode
- (with the rp keyword) number
of source-group pairs associated with the RP router for PIM sparse
mode
Privileged Exec
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
