[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
debug ip mbgp
Syntax
debug ip mbgp [ in | out ] [ peerAddress [ peerAddressMask ] ] [ bgpLog ]
[ router routerName ] [ filtering-router filteringRouterName ] [ accessClassName ]
[ route-map mapName ] [ severity
{ severityValue | severityNumber } ]
[ verbosity verbosityLevel ] [ secondary ]
no debug ip mbgp [ in | out ] [ peerAddress [ peerAddressMask ] ] [ bgpLog ]
[ router routerName ] [ filtering-router filteringRouterName ] [ accessClassName ]
[ route-map mapName ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Shows information about the selected variable.
The no version disables the display.
Options
- in—Displays information for inbound events
- out—Displays information for outbound events
-
peerAddress—IP address of
BGP peer for which information is displayed
-
peerAddressMask—Network mask
of BGP peer for which information is displayed
-
bgpLog—BGP log of interest;
one of the following options:
- dampening—BGP dampening event; route is suppressed
or no longer suppressed by route-flap dampening
- events—BGP finite state machine events and transitions
- keepalives—BGP keepalive message events
- next-hops—BGP next hop events
- updates—BGP routing table update events
-
routerName—Name of the virtual
router that owns the BGP router for which information is being displayed
-
filteringRouterName—Name of
the virtual router that owns the access class and route map parameters
-
accessClassName—Name of an
access list to filter output
-
mapName —Name of a route map
to filter output
- severity—Specifies the minimum severity of the log
messages displayed for the selected category; described either by
a descriptive term—severityValue—or
by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the
priority:
- emergency or 0—System unusable
- alert or 1—Immediate action
needed
- critical or 2—Critical condition
exists
- error or 3—Error condition
- warning or 4—Warning condition
- notice or 5—Normal but significant
condition
- info or 6—Informational message
- debug or 7—Debug message
-
verbosityLevel—Verbosity of
the log category's messages; can be any of the following:
- low—Terse
- medium—Moderate detail
- high—Verbose
- secondary—Indicates that the specified filter conditions
for the log are imposed in addition to any that were previously specified;
if omitted, the specified filter conditions replace any that were
previously specified
Privileged Exec
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
