 |
Note: You can configure this command only if you have enabled the debounce timer feature using the debounce command. |
debounce-interval seconds
no debounce-interval
Command introduced in JUNOSe Release 9.3.0.
Modifies the minimum time an Ethernet interface must maintain a given state—for example, up or down—before the interface notifies the upper-layer protocols of the state change. The no version restores the default value, 1 second.
|
Note: You can configure this command only if you have enabled the debounce timer feature using the debounce command. |
Interface Configuration
 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |