 |
Note: Do not assign the bridge group the same name as an existing virtual router configured on the router. |
[ no ] bridge bridgeGroupName
Command introduced before JUNOSe Release 7.1.0.
Creates a bridge group to use for transparent bridging. A bridge group is a named collection of network interfaces (ports) on an E-series router that forms a broadcast domain. Each bridge group has its own set of forwarding tables and filters and, as such, functions as a logical bridging device. The no version removes the bridge group configuration from the router.
To configure an existing bridge group as a VPLS instance, you must use the bridge vpls transport-virtual-router command.
|
Note: Do not assign the bridge group the same name as an existing virtual router configured on the router. |
Global Configuration
 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |