[Contents] [Prev] [Next] [Index] [Report an Error]

address priority

Syntax

[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier }
priority intfPriority

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Sets the router priority. Used in determining the designated router for the particular network. This designation only applies to multi-access networks. Every broadcast and nonbroadcast multiaccess network has a designated router. The no version restores the default value.

Note: You must issue the address area command before issuing this command.

Options

ipAddress—OSPF interface address previously specified with the address command
unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command
- interfaceType—Interface type; see Interface Types and Specifiers
- interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
intfPriority—Priority value, an 8-bit number in the range 1–255; default value is 1

Router Configuration

[Contents] [Prev] [Next] [Index] [Report an Error]