[Contents] [Prev] [Next] [Index] [Report an Error]

address dead-interval

Syntax

[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier }
dead-interval deadInterval

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Sets the time period that the router's neighbors should wait without seeing hello packets from the router before they declare the router to be down. The no version resets the dead interval to its default.

Note: You must issue the address area command before issuing this command.

Options

ipAddress—OSPF interface address previously specified with the address command
unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command
- interfaceType—Interface type; see Interface Types and Specifiers
- interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
deadInterval—Number in the range 0–2147483647 seconds; default value is 40 seconds

Router Configuration

[Contents] [Prev] [Next] [Index] [Report an Error]