[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
address bfd-liveness-detection
Syntax
address { ipAddress | unnumbered interfaceType interfaceSpecifier }
bfd-liveness-detection
[ minimum-interval minInterval |
[ minimum-receive-interval minRecInterval ]
[ minimum-transmit-interval minTransInterval ] ] [ multiplier multValue ]
no address { ipAddress | unnumbered interfaceType interfaceSpecifier }
bfd-liveness-detection
Release Information
Command introduced in JUNOSe Release 8.0.0.
Description
Enables BFD (bidirectional forwarding detection)
on an interface running RIP and defines BFD values to be negotiated
between peers for detection of IP data path failures. The no version disables BFD on the RIP interface.
Options
-
ipAddress—Address of IP interface
where RIP will be run
- unnumbered—Specifies that RIP will be run on an
unnumbered interface
-
minInterval —Minimum proposed
transmit interval and required receive interval for BFD control packets;
has the same effect as configuring the minimum receive interval and
the minimum transmit interval to the same value; number in the range
100–65535 milliseconds—for ES2 4G LM only, the range is
10–65535 milliseconds; default value is 300 milliseconds
-
minRecInterval—Minimum interval
at which the local peer must receive BFD control packets sent by the
remote peer; number in the range 100–65535 milliseconds—for
ES2 4G LM only, the range is 10–65535 milliseconds; default
value is 300 milliseconds
-
minTransInterval—Minimum proposed
interval between BFD control packets sent by the local peer; number
in the range 100–65535 milliseconds—for ES2 4G LM only,
the range is 10–65535 milliseconds; default value is 300 milliseconds
-
multValue—Detection multiplier
value that the remote peer router multiplies by the local peer's
negotiated transmit interval to determine the remote peer's BFD
liveness detection interval; equal to the number of BFD packets that
can be missed before the BFD session is declared down; number in the
range 1–255; default value is 3
Address Family Configuration, Router Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
