Using Service Session Profiles to Deactivate Service Sessions

To terminate a subscriber service session when a threshold is reached, you create a service session profile that includes a time threshold, or a volume threshold, or both. Then, you attach the service session profile when you activate the service session. When the specified threshold is reached, the service session is terminated.

Note: This feature is not supported by the service-management owner-session command. The service-management owner-session command only supports service session profiles when activating service sessions.

The following example shows the commands you might use to create a time threshold for deactivating a service session. See Using Service Session Profiles for information about using the time and volume keywords in service session profiles.

To create or modify a service session profile:

1. Specify the name of the service session profile and configure the threshold:

   host1(config)#service-management service-session-profile vodISP1

   host1(config-service-session-profile)#time 6000

   host1(config-service-session-profile)#exit

2. Include the service session profile when you activate the subscriber service session:

   host1(config)#service-management subscriber-session client1@isp1.com interface atm 4/0.1 service-session “video(4500000, 192.168.10.3)” service-session-profile vodISP1

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.