Monitoring L2TP and L2TP Dial-Out

When you have configured L2TP and L2TP dial-out on your E-series router, you can monitor the active tunnels and sessions.

Note: All of the commands in this chapter apply to both the LAC and the LNS.

L2TP and L2TP dial-out topics are described in the following sections:

• Monitoring the Mapping for User Domains and Virtual Routers with AAA
• Monitoring Configured Tunnel Groups with AAA
• Monitoring Configuration of Tunnel Parameters with AAA
• Monitoring Global Configuration Status on E-series Routers
• Monitoring Detailed Configuration Information for Specified Destinations
• Monitoring Locked Out Destinations
• Monitoring Configured Destination Profiles or Host Profiles
• Monitoring Configured and Operational Status of all Destinations
• Monitoring Statistics on the Cause of a Session Disconnection
• Monitoring Detailed Configuration Information about Specified Sessions
• Monitoring Configured and Operational Summary Status
• Monitoring Configured Switch Profiles on Router
• Monitoring Detailed Configuration Information about Specified Tunnels
• Monitoring Configured and Operational Status of All Tunnels
• Monitoring Chassis-wide Configuration for L2TP Dial-out
• Monitoring Status of Dial-out Sessions
• Monitoring Dial-out Targets within the Current VR Context
• Monitoring Operational Status within the Current VR Context

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.