[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Designating Traffic for the Primary IP Interface
When dynamic creation of subscriber interfaces
is enabled on the primary IP interface (by means of the ip auto-configure ip-subscriber command), you can use
the ip source-prefix command to specify
the source address of traffic that is destined for the primary IP
interface instead of the subscriber interface. If the DHCP server
(for DHCP server configurations) or the router (for packet detection
configurations) then assigns a subscriber an IP address matching this
source prefix, the router does not create a dynamic subscriber interface
for that address.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
