Configuring a QoS Profile for Service Manager

To configure a QoS profile for Service Manager:

1. Configure the profile.

   host1(config)#profile videoService

2. Configure the QoS profile.

   host1(config-profile)#qos-profile videoBandwidth1

3. (Optional) Complete the QoS profile configuration described in the Configuring and Attaching QoS Profiles to an Interface chapter in JUNOSe Quality of Service Configuration Guide.

profile

• Use to create a profile and enter Profile Configuration mode.
• You specify a profile name with up to 80 alphanumeric characters.
• Example

  host1(config)#profile iptv

  host1(config-profile)#

• Use the no version to remove a profile.
• See profile

qos-profile

• Use to add a QoS profile command for use with Service Manager. When the service is activated, the QoS profile is created and attached to the subscriber interface.
• Example

  host1(config)#profile iptv

  host1(config-profile)#qos-profile video

• Use the no version to remove the QoS profile from the profile.
• See qos-profile

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.