[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Before You Configure L2TP Dial-Out
Create a profile that the router uses to create
the dynamic PPP and IP interfaces on the LNS. The profile specifies
parameters that are common to all dial-out sessions that use the profile.
The following is an example of a typical profile configuration.
- Create a profile.
- host1(config)#profile dialOut
- host1(config-profile)#
- Specify the interface used for dialout.
- host1(config-profile)#ip unnumbered loopback
0/0
- Specify the virtual router for the dial-out user’s
IP interface.
- host1(config-profile)#ip virtual-router lns
- Specify the authentication mechanism.
- host1(config-profile)#ppp authentication chap
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
