[97] Framed-Ipv6-Prefix

Use the following command to manage the Framed-Ipv6-Prefix RADIUS attribute.

• radius include framed-ipv6-prefix

radius include framed-ipv6-prefix

• Use to include the Framed-Ipv6-Prefix attribute in Access-Request, Acct-Start, or Acct-Stop messages.
• You can control inclusion of the Framed-Ipv6-Prefix attribute by enabling or disabling this command.
• For RADIUS to include this attribute, at least one IPv6 prefix must be assigned to the subscriber.
• See radius include

• Example

  host1(config)#radius include framed-ipv6-prefix acct-start enable

• Use the no version to restore the default, disable.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.