[96] Framed-Interface-Id

Use the following command to manage the Framed-Interface-Id RADIUS attribute.

• radius include framed-interface-id

radius include framed-interface-id

• Use to include the Framed-Interface-Id attribute in Access-Request, Acct-Start, or Acct-Stop messages.
• You can control inclusion of the Framed-Interface-Id attribute by enabling or disabling this command.
• For RADIUS to include this attribute, an IPv6 interface ID must be assigned to the subscriber.
• See radius include

• Example

  host1(config)#radius include framed-interface-id acct-start enable

• Use the no version to restore the default, disable.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.