[30] Called-Station-Id

Use the following command to manage the Called-Station-Id RADIUS attribute.

• radius include called-station-id

radius include called-station-id

• Use to include the Called-Station-Id attribute in Access-Request, Acct-Start, or Acct-Stop messages.
• You can control inclusion of the Called-Station-Id attribute by enabling or disabling this command.
• See radius include

• Example

  host1(config)#radius include called-station-id acct-start enable

• Use the no version to restore the default, enable.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.