[26-51] Disconnect-Cause

Use the following command to manage the Disconnect-Cause RADIUS attribute.

• radius include l2tp-ppp-disconnect-cause

radius include l2tp-ppp-disconnect-cause

• Use to include the Disconnect-Cause attribute in Acct-Stop and Acct-Tunnel-Link-Stop messages.
• You can control inclusion of the attribute by enabling or disabling this command.
• See radius include

• Example

  host1(config)#radius include l2tp-ppp-disconnect-cause acct-stop-enable

• Use the no version to restore the default, disable.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.