[26-24] Pppoe-Description

Use the following command to manage the Pppoe-Description RADIUS attribute.

• radius include pppoe-description

radius include pppoe-description

• Use to include the Pppoe-Description attribute in Access-Request, Acct-Start, or Acct-Stop messages.
• You can control inclusion of the Pppoe-Description attribute by enabling or disabling this command.
• See radius include

• Example

  host1(config)#radius include pppoe-description acct-start enable

• Use the no version to restore the default, enable.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.