[26-141] Downstream-Calculated-Qos-Rate

The Downstream-Calculated-Qos-Rate RADIUS attribute enables RADIUS to receive calculated QoS rates from ANCP.

Use the following command to manage the Downstream-Calculated-Qos-Rate RADIUS attribute.

• radius include downstream-calculated-qos-rate access-request
• radius include downstream calculated-qos-rate acct-start
• radius include downstream-calculated-qos-rate acct-stop

radius include downstream-calculated-qos-rate

• Use to include the Downstream-Calculated-Qos-Rate attribute in Access-Request, Acct-Start, and Acct-Stop messages.
• You can control inclusion of the Downstream-Calculated-Qos-Rate attribute by enabling or disabling this command. Inclusion is disabled by default.
• Example

  host1(config)#radius include downstream-calculated-qos-rate access-request enable

• Use the no version to restore the default, disable.
• See radius include

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.