Verifying the Tunnel-Server Interface Configuration

To verify that you properly provisioned the number of tunnel-server interfaces on the tunnel-server port:

1. From Tunnel Server Configuration Mode, return to Privileged Exec mode.

   host1(config-tunnel-server)#exit

   host1(config)#exit

   host1#

2. Issue the show tunnel-server config command.

   host1#show tunnel-server config
   
   

                             Server Ports
                             ------------
                                            Provisioned
     Port      Type     MaximumInterfaces   Interfaces    HwPresent
   --------   -------   -----------------   -----------   ---------
   Port 2/2   shared       8000                5000          yes
   Port 8/0   dedicated    16000               all-available yes

   For more information about using the show tunnel-server command, see Monitoring Tunnel-Service Interfaces.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.