T3 Configuration Tasks

Before you configure T3 on an interface, you must configure SONET or SDH on the interface. See SONET/SDH Configuration Tasks.

To configure T3 over SONET or SDH on a cOCx/STMx interface, complete the following actions:

1. Configure a T3 path over the SONET and SDH interfaces.
2. Configure T3 line parameters (for both clear channel T3 lines and multiplexed T3 lines composed of fractional T1 lines).
3. (Optional) Configure T1 or fractional T1 line parameters.

For detailed examples, see Configuration Examples.

path ds3

• Use to create and configure a T3 path over SONET and SDH interfaces.
• Example

  host1(config-controller)#path 2 ds3 1 channelized

• Use the no version to delete a path.
• See path ds3.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.