[Contents] [Prev] [Next] [Index] [Report an Error]

Monitoring Tunnel-Service Interfaces

You can monitor tunnel-service interfaces by using the show tunnel-server command.

Note: The E120 router and E320 router output for monitor and show commands is identical to output from other E-series routers, except that the E120 and E320 router output also includes information about the adapter identifier in the interface specifier (slot/adapter/port).

show tunnel-server

Use to display status and configuration information for dedicated and shared tunnel-server ports and tunnel-service interfaces configured on the router. Unconfigured tunnel-server ports are not displayed in the output.
You can display information for a specific tunnel-server port or for all tunnel-server ports.
Use the optional config keyword to display information about available and provisioned tunnel-service interfaces on each port, and to indicate whether modules that support the use of dedicated or shared tunnel-server ports are currently installed in the router.
Field descriptions
- Port:Appl—Identifier in slot/port or slot/adapter/port format for the module or tunneling application
  - slot—Number of the slot in the chassis where the module resides
  - adapter—Number of the bay in which the I/O adapter (IOA) resides.
    This identifier applies only to dedicated and shared tunnel-server ports configured on the E120 and E320 routers. Dedicated tunnel-server ports are always adapter 0; shared tunnel-server ports are always adapter 2.
  - port—Number of the tunnel-server port on the module; for dedicated tunnel-server ports, this is a virtual port number that is always 0; for shared tunnel-server ports, this is a virtual port number dynamically assigned by the router
- Card Type or Active Type—Type of port: dedicated or shared
- Oper State or Max State—Physical state of the port or application
  - up—Port or application is available
  - down—Port or application is unavailable
  - present—Module associated with this port is installed
  - not present—Module associated with this port has been removed
  - pending—Router has not yet detected all previously configured modules during a reboot or initial installation of the module
- Active Interfaces or Interfaces—Number of tunnel-service interfaces currently configured on this port
- Max Interfaces—Total number of tunnel-service interfaces available on this module
- Fill—Percentage of available interfaces used by a server port, an application on a server port, an application on all server ports, and all server ports
- Appl Totals—Statistics for each application
- Server Ports—Displays configuration information about dedicated and shared tunnel-server ports on the router; this display format appears only when the config keyword is specified
  - Port—Identifier in slot/port format (ERX-7xx models, ERX-14xx models, and ERX-310 routers) or slot/adapter/port format (E120 and E320 routers) for the module on which the tunnel-server port resides
  - Type—Type of tunnel-server port: dedicated or shared
  - MaximumInterfaces—Total number of tunnel-service interfaces available on this module
  - Provisioned Interfaces—Total number of tunnel-service interfaces currently provisioned on this port
  - HwPresent—Indicates whether a module that supports the specified tunnel-server port is currently installed in the router: yes or no

Example 1—Displays information about a dedicated tunnel-server port on an SM

host1#show tunnel-server

                  Card      Oper     Active      Max         
   Port:Appl      Type      State  Interfaces Interfaces Fill
--------------- ---------  ------- ---------- ---------- ----
       Port 8/0 dedicated  present          1       8000 0.0%
   ipsec-tunnel               down          0          0 0.0%
ipsec-transport               down          0          0 0.0%
           l2tp                 up          0       8000 0.0%
      gre/dvmrp                 up          1       4000 0.0%
    Appl Totals                                           
   ipsec-tunnel                             0          0 0.0%
ipsec-transport                             0          0 0.0%
           l2tp                             0       8000 0.0%
      gre/dvmrp                             1       4000 0.0%
          total                             2      12000 0.0%

Example 2—Displays information about a dedicated tunnel-server port on an ISM

host1#show tunnel-server

Card      Oper     Active      Max         
   Port:Appl        Type      State  Interfaces Interfaces Fill
--------------- ---------  ------- ----------  ---------- ----
       Port 2/0 dedicated  present          1        8000 0.0%
   ipsec-tunnel                 up          0           0 0.0%
ipsec-transport               down          0           0 0.0%
           l2tp               down          0        8000 0.0%
      gre/dvmrp                 up          1        4000 0.0%
    Appl Totals                                           
   ipsec-tunnel                             0           0 0.0%
ipsec-transport                             0           0 0.0%
           l2tp                             0       16000 0.0%
      gre/dvmrp                             2        8000 0.0%
          total                             2       16000 0.0%

Example 3—Displays information about a specific shared tunnel-server port

host1#show tunnel-server 2/2

                  Card      Oper     Active      Max         
   Port:Appl      Type      State  Interfaces Interfaces Fill
--------------- ---------  ------- ---------- ---------- ----
       Port 2/2   shared   present          0       4000 0.0%
   ipsec-tunnel               down          0          0 0.0%
ipsec-transport               down          0          0 0.0%
           l2tp                 up          0       4000 0.0%
      gre/dvmrp                 up          0       4000 0.0%

Example 4—Displays configuration information about dedicated and shared tunnel-server ports

host1#show tunnel-server config

                          Server Ports
                          ------------
                                         Provisioned
  Port      Type     MaximumInterfaces   Interfaces    HwPresent
--------   -------   -----------------   -----------   ---------
Port 2/2   shared       8000                4000          yes
Port 8/0   dedicated    16000               16000         yes

See show tunnel-server.

[Contents] [Prev] [Next] [Index] [Report an Error]