[Contents] [Prev] [Next] [Index] [Report an Error]

Interface Stack

Figure 3 shows the stack for T3 ATM interfaces. Figure 4 shows the stack for T3 frame and E3 frame interfaces.

To configure a T3 ATM interface, first configure a T3 controller. To configure ATM parameters, see Configuring ATM in JUNOSe Link Layer Configuration Guide .

To configure a T3 frame or E3 frame interface, first configure a T3 or E3 controller, and then configure a High-Speed Data Link Control (HDLC) data channel on the controller.

Figure 3: Stack for T3 ATM Interfaces

Image g013648.gif

Figure 4: Stack for T3 Frame and E3 Frame Interfaces

Image g013647.gif

Note: For a detailed description of interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide. For information about interfaces, see Planning Your Network in JUNOSe System Basics Configuration Guide.

[Contents] [Prev] [Next] [Index] [Report an Error]