[Contents] [Prev] [Next] [Index] [Report an Error]

Exchanging Modules

If you replace an OC3 I/O module with an OCx/STMx line module and a corresponding OC3-4 I/O module or vice versa, you must erase the configuration of the existing modules. See slot accept in JUNOSe System Basics Configuration Guide.

On the E120 and E320 routers, if you replace an ES2-S1 OC3-8 STM1 ATM IOA with an ES2-S1 OC12 STM4 POS IOA, you must erase the configuration of the existing IOA. See adapter accept or slot accept in chapter Managing Modules JUNOSe System Basics Configuration Guide.

[Contents] [Prev] [Next] [Index] [Report an Error]