[Contents] [Prev] [Next] [Index] [Report an Error]

Example 4: Configuring PPP

The following example illustrates how to configure PPP on VT 1/2/2 in path 2 of the configuration shown in Figure 11.

  1. Select the interface on which you want to configure PPP.
    host1(config)#interface serial 4/0:2/1/2/2/1
  2. Specify PPP as the encapsulation method on the interface.
    host1(config-if)#encapsulation ppp
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.