E120 Router and E320 Router

Use the slot/adapter/port format to identify dedicated and shared tunnel-server ports.

• slot—Number of the slot in which the line module resides in the chassis

  In the E120 router, line module slots are numbered 0–5. In the E320 router, line module slots are numbered 0–5 and 11–16. For both routers, slots 6 and 7 are reserved for SRP modules; slots 8–10 are reserved for switch fabric modules (SFMs).

• adapter—Number of the bay in which the I/O adapter (IOA) resides

  This identifier applies to the E120 and E320 routers only. Dedicated tunnel-server ports are supported on the ES2-S1 Service IOA, which is a full-height IOA and is identified in the software as adapter 0. Shared tunnel-server ports reside on a virtual adapter that is identified in the software as adapter 2.

• port—Number of the port on the IOA

  For more information about identifying the port number on a tunnel-server port, see Configuring Tunnel-Server Ports and Tunnel-Service Interfaces .

For information about installing tunnel-server modules in the E120 and E320 routers, see E120 and E320 Hardware Guide, Chapter 4, Installing Modules.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.