Configuring T1 Channels

To configure T1 channels and subchannels:

1. From Global Configuration mode, specify the T3 controller in slot 0, port 1.

   host1(config)#controller t3 0/1

2. Assign a range of timeslots to a channel and subchannel.

   For example, assign the following range of timeslots: 1, 3–8, and 10 to channel 2, subchannel 1. Timeslots 2, 9, and 11–24 are available for other subchannels.

   host1(config-controll)#t1 2/1 timeslots 1,3-8,10

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.