[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuration Tasks
When configuring an unchannelized SONET/SDH interface,
you first configure ATM or POS on the interface. For details on configuring
POS and ATM, see Configuring ATM and Configuring
packet over SONET in JUNOSe Link Layer Configuration Guide ,
- On an OCx/STMx/DS3-ATM line module with an OC3-4 or OC12
I/O module, you can configure only ATM interfaces.
- On an OCx/STMx POS line module with an OC3-4 or OC12 I/O
module, you can configure only POS interfaces.
- On an OC48 line module with an OC48 FRAME I/O module,
you can configure only POS interfaces.
- On an OC3/STM1 GE/FE line module with an OC3-2 GE APS
I/O module, you can configure only ATM interfaces on ports 0 and 1.
- On an ES2 4G LM with an ES2-S1 OC12-2 STM4 POS IOA or
an ES2-S1 OC48 STM16 POS IOA, you can configure only POS interfaces.
- On an ES2 4G LM with an ES2-S1 OC3-8 STM1 ATM IOA or an
ES2-S1 OC12-2 STM4 ATM IOA, you can configure only ATM interfaces.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
