[Contents] [Prev] [Next] [Index] [Report an Error]

Configuration Tasks

Configure a T3 interface by entering Global Configuration mode and performing the following tasks:

  1. Configure a T3 controller.
  2. (Optional) Configure MDL settings.
  3. (Optional) Configure other settings for the interface.
  4. Configure HDLC channels for T3 frame and E3 frame controllers.
  5. (Optional) Configure fractional T3 for T3 frame controllers.
  6. Use the appropriate show commands to verify your configuration.

E3 interface configuration tasks are identical to T3 interface configuration tasks, except that the CLI commands contain e3 instead of t3.

For example, you configure an E3 controller with the controller e3 command instead of the controller t3 command.

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.