[Contents] [Prev] [Next] [Index] [Report an Error]

Configuration Example

The following example shows how to configure working and protect interfaces for APS/MSP.

  1. Configure the working interface.
    host1(config)#controller sonet 3/0
    host1(config-controller)#aps group boston
    host1(config-controller)#aps working 1
  2. Configure the protect interface.
    host1(config-controller)#controller sonet 3/1
    host1(config-controller)#aps group boston
    host1(config-controller)#aps protect 0
    host1(config-controller)#aps unidirectional
    host1(config-controller)#aps revert 30
    host1(config-controller)#threshold sf-ber 4
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.