[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuration Example
The following example illustrates how to configure
the layers on a channelized T3 interface:
- host1(config)#controller t3 0/1
- host1(config-controll)#no shutdown
- host1(config-controll)#framing c-bit
- host1(config-controll)#clock source internal
module
- host1(config-controll)#cablelength 220
- host1(config-controll)#t1 2 framing esf
- lihost1(config-controll)#t1 2 clock source
internal
- host1(config-controll)#t1 2 loopback local
- host1(config-controll)#t1 2/1 timeslots 1,3-8,10
- host1(config-controll)#exit
- host1(config)#interface serial 0/1:2/1
- host1(config-if)#invert data
- host1(config-controll)#exit
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
