Management Ports

The Management section of the SRP IOA has three ports (Figure 26) for management access:

• One 10/100Base-T Ethernet port—Accepts an RJ-45 (male) connector, providing an out-of-band connection for LAN access through a Telnet session or SNMP.
• Two RS-232 management ports—Accept a DB-9 (female) connector. One port provides direct CLI access from a console terminal; the other Auxiliary port provides debug access from a console terminal.

The management port is considered a data terminal equipment interface (DTE). Direct connection to a terminal or PC (which also have DTE interfaces) requires a crossover cable.

See Accessing E-series Routers for more information about management access.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.