Installing the Router

To complete the installation of the router in a rack, you need:

A Phillips screwdriver
Eight 10-32 x 3/8 Phillips screws (provided with the router) for each router to be installed

Warning: Do not use the cable management bracket as a handle to lift the E320 router.

To install the router in the rack:

With one person standing on the left side of the router and another standing on the right side, lift the router into the rack.
Position the router in its designated location in the equipment rack. Make sure the holes of the mounting brackets align evenly with the holes of the equipment rack on both sides.
Starting at the bottom of the router, have the third person secure the router in the equipment rack by using the 10-32 x 3/8 Phillips screws.
Connect the necessary cables. (See Cabling the Router for instructions on installing the cables.)