[Contents] [Prev] [Next] [Report an Error]

GE Single-Mode Module Combination (1 Port)

Line module label GE/FE

I/O module label GE I/O
SINGLE MODE

Number of I/O ports

1 active, 1 redundant

Software release

First supported: 2.0.0

Final supported: Not applicable

Description

130 W

Gigabit Ethernet

This module combination has been superseded by a newer assembly; however, it is supported by current software.

Type

EFA ASIC

Capability

Ethernet (IEEE 802.3z)

Software features

See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.

Model compatibility

ERX-7xx models

ERX-14xx models

ERX-310 router

SRP module compatibility

SRP-5G+

SRP-10G

SRP-40G

SRP-40G PLUS

SRP-SE10G

Module redundancy support

Not applicable

Cables and connectors

SC full duplex

Tx power:

min: –11 dBm

max: –3 dBm

Center wavelength: 1300 nm

Rx input power:

min: –20 dBm

max: –3 dBm

Rated for 550 m (601 yards) over 62.5-micron core or 50-micron core MM fiber

Rated for 5 km (3.1 miles) over 10-micron core cable

See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.

LEDs

See Module LEDs.

Alarms, errors, and events

See Monitoring Ethernet Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.

[Contents] [Prev] [Next] [Report an Error]

Line module label	GE/FE
I/O module label	GE I/O SINGLE MODE
Number of I/O ports	1 active, 1 redundant
Software release	First supported: 2.0.0 Final supported: Not applicable
Description	130 W Gigabit Ethernet This module combination has been superseded by a newer assembly; however, it is supported by current software.
Type	EFA ASIC
Capability	Ethernet (IEEE 802.3z)
Software features	See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX-7xx models ERX-14xx models ERX-310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	Not applicable
Cables and connectors	SC full duplex Tx power: min: –11 dBm max: –3 dBm Center wavelength: 1300 nm Rx input power: min: –20 dBm max: –3 dBm Rated for 550 m (601 yards) over 62.5-micron core or 50-micron core MM fiber Rated for 5 km (3.1 miles) over 10-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring Ethernet Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.