Installing Modules

This chapter describes how to install and remove E-series modules. For information about managing installed modules, see JUNOSe System Basics Configuration Guide, Chapter 6, Managing Modules.

This chapter contains the following sections:

• Overview
• Safety Guidelines
• Installing SRP I/O and SRP Modules
• Installing Line and I/O Modules
• Removing a Line Module, SRP Module, or SRP I/O Module
• Installing Components for Line Module Redundancy
• Configuring Line Module Redundancy
• The Next Step

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.