Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    CTP1000 Platform SSH Setup

    When you have configured an IP address for the CTP1000 device, you can run SSH from a host to access the device through its Ethernet port. To connect the Ethernet port to the network:

    1. Connect an Ethernet RJ-45 cable to one of the two Ethernet ports on the rear panel of the CTP1000 chassis.
    2. Connect the other end of the cable to the appropriate Ethernet network for an out-of-band connection.

    Caution: Do not change the IP address for the Ethernet interface that you are using to communicate with the device. If you change the address, you will lose the SSH session.

    Modified: 2015-11-22