Cabling a CTP2000 T1/E1 Interface Module
To install a cable in an interface module:
- Ground yourself by using an antistatic wrist strap or other device, and connect it to an ESD grounding jack, if available, or another grounding device.
- Slide the cable as far as you can into the module until it clicks into place.
- Gently pull the cable to confirm that it is inserted correctly.
- Go on to Cabling the CTP Platform for DC Power.
For more information about T1/E1 interface module pinouts for the RJ-45 connector, refer T1/E1 Interface Module Pinouts.