Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Cabling a CTP150 Interface Module


To install a cable in an interface module:

  1. Ground yourself by using an antistatic wrist strap or other device, and connect it to an ESD grounding jack, if available, or another grounding device.
  2. Slide the cable as far as you can into the module until it clicks into place.
  3. Gently pull the cable to confirm that it is inserted correctly.
  4. Go on to Before You Power On the CTP150 Device.

For more information about CTP150 Series cable and pinout specifications, refer Cable and Pinout Specifications.