Mini-USB Type-B Console Port Specifications for a CTP151 Device
A CTP151 device has two ports: an RJ-45 port and a Mini-USB port.
By default, the RJ-45 port is set as the active console port. It can display all the early boot and low-level message output and you can access the device through this port in the debugger prompt.
The Mini-USB console port uses a Mini-B plug (5-pin) connector to connect to a console management device. The default baud rate for the console port is 9600 baud.
Table 1 provides the pinout information of the Mini-USB Type-B console port.
Table 1: Mini-USB Type-B Console Port Pinout Information for CTP151 Device
May be N/C, GND or used as an attached device presence indicator