Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

CTP2000 Serial Interface Modules

 

The Juniper Networks CTP2008, CTP2024, and CTP2056 Circuit to Packet platforms have up to one, three, and seven serial interface modules, respectively. The interface modules are interchangeable between the platforms.

The following interface modules have two 100-pin connectors similar to the connectors provided on the CTP1004 and CTP1012 platforms. Each connector provides four ports by means of the quad cable. (See Cabling the CTP2000 Platform Overview.) The lowest-numbered ports start at the top right.

  • CTP2000 IM-8P—Provides the standard software-configurable data interfaces, including EIA530, EIA530A, RS-232, and V.35; 8 port.

  • CTP2000 IM-8P-T1—Provides the standard software-configurable data interfaces, plus a configurable T1/E1 interface; 8 port.

  • CTP2000 IM-8P-V—Provides the standard software-configurable data interfaces, plus a configurable 4WTO interface; 8 port.

Figure 1: Sample Serial Interface Module
Sample Serial Interface
Module