Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

CTP151 Platform Overview

 

The Juniper Networks CTP151 Circuit to Packet platform is a 1-U high, full-rack wide chassis and can be installed in a rack with the supplied rack-mounting kit. The CTP151 platform has two removable modules for serial interfaces, T1/E1 interfaces, or both.

The CTP151 platform has four 10BASE-T, 100BASE-T, or 1000BASE-T RJ-45 ports that can be used as either access ports or uplink ports, two ports that support small form-factor pluggable plus (SFP+) transceivers, one management port, one RJ-45 console port, one Mini-USB console port, and one USB 3.0 port. The CTP151 platform has a 1 U form factor and comes with three built-in fans and one built-in power supply.

Note

The SFP+ ports are not functional in CTPOS 9.1, CTPView 9.1, and earlier releases.

Figure 1 shows the front panel components of a CTP151.

Figure 1: Front Panel Components of a CTP151
Front Panel Components
of a CTP151
  1
Mini-USB console port
  6
Interface module slots
  2
RJ-45 console port
  7
Two 1-Gigabit Ethernet/10-Gigabit Ethernet SFP+ WAN ports
  3
One 10/100/1000BASE-T RJ-45 management port
  8
USB 3.0 port
  4
Four 10/100/1000BASE-T RJ-45 LAN ports
  9
Reset button
  5
System status LEDs
 

Figure 2 shows the rear panel of a CTP151.

Figure 2: Rear Panel Components of a CTP151
Rear Panel Components
of a CTP151
  1
AC power cord inlet
  5
Fans
  2
Power switch
  6
CLEI code
  3
Grounding points
  7
Electrostatic discharge (ESD) point
  4
Serial number