Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     
     

    CTP1012 Platform

    The CTP1012 platform is a 1-U high, full-rack wide chassis designed for tabletop or shelf installation. It can also be installed in a rack with the supplied rack-mounting kit. The CTP1012 device does not have any removable interface modules, but does use a removable Type II CompactFlash card and is available in an AC-powered version. It has multiple cooling fans, and airflow is front to back. See Figure 1 and Figure 2.

    Figure 1: CTP1012 Platform (AC Version, Front View)

    CTP1012 Platform (AC Version,
Front View)

    The front panel comprises the following components (see Figure 1):

    • Power LED—Green when power is connected and the power switch is set to the ON position.
    • HDD LED—Red when the flash card is in use.
    • Front power switch—Set to ON position when 1 is briefly pressed. Set to OFF when 1 is pressed for four or more seconds.
    • Removable flash card—The device must be powered off when you insert or remove the flash card.
    • USB ports.

    The rear panel comprises the following components (See Figure 2):

    • Power supply—Uses a standard IEC power cord.
    • Ethernet connection—Provides the 100-Mbps Ethernet connection to the IP network by means of a local Ethernet switch or router.
    • Console connection—Provides an asynchronous TTY connection for locally configuring the CTP device. See CTP1000 Console Cable Pinouts to find pinout information for this connector.
    • Interface connector—Features a 100-pin connector providing four serial interfaces when used with the CTP quad cable. SeeCTP1000 Interface Module 100-to-25-Pin Cable Pinouts to find pinout information for this connector.
    • USB ports.

    Figure 2: CTP1012 Platform (AC Version, Rear View)

    CTP1012 Platform (AC Version,
Rear View)
     
     

    Modified: 2015-11-22