Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installing or Removing a CTP2000 Series CompactFlash Card

 

On the CTP2000 series devices with the new PP833 processor, the CompactFlash card is installed on the processor itself (which may be located under an installed PMC card), which prevents insertion or removal of the CompactFlash card until the PMC card is removed. On the CTP2000 series devices with the PP310 and PP332 processors, the CompactFlash card is installed on the processor rear transition module (RTM). Some CTP devices may ship with a CompactFlash card already installed.

To remove or install the CompactFlash card for the CTP2000 series with the new PP833 processor (see Figure 36):

  1. Power off the unit.
  2. If installed, remove the PP833 PMC card by unscrewing the retaining screws and pushing the extractors outward with the latching buttons depressed.
  3. You can then remove or install the CompactFlash card in the flash socket.
  4. If being used, reinstall the PP833 PMC card into the chassis, and secure the retaining screws.
Figure 36: Installing CompactFlash on the PP833 processor
Installing
CompactFlash on the PP833 processor

To remove or install the CompactFlash card for the CTP2000 series with the PP310 and PP332 processors (see Figure 37):

  1. Power off the unit.
  2. Remove the processor RTM by unscrewing the retaining screws and pushing the extractors outward with the latching buttons depressed.
  3. Remove the CompactFlash card retaining screw and nut. You can then remove or install the CompactFlash card in the flash socket (see Figure 37).
  4. Reinstall the CompactFlash card retaining screw and nut.
  5. Reinstall the processor RTM into the chassis, and secure the retaining screws.
Figure 37: CompactFlash on the RTM
CompactFlash on the RTM