Unpacking the CTP Device
Depending on the device, it may be delivered boxed, bolted, and strapped to a skid. For your convenience, we recommend that you unpack the device in the location where you want to install it.
For the larger CTP series devices, three people are required to install the device in a rack: two to lift the device into position and one to screw it to the rack.
To unpack the device:
- Cut the two straps that secure the carton to the skid, open the carton from the top, and remove the box of accessories that sits on top of the device.
- Unlock the four plastic clips that hold the box to the skid by squeezing them in their center and pulling out, and then lift the carton off the device.
- Remove the three screws that attach each of the two L-brackets to the device.
- To avoid scratching the device when removing it from the skid, detach one of the L-brackets from the skid by removing the three screws.