Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Table of Contents

CTP2000 Series Platform Overview
Introducing CTP Platforms
CTP2000 Series Processor
CTP2008 Platform
CTP2024 Platform
CTP2056 Platform
CTP2000 Series Interface Modules
CTP2000 Serial Interface Modules
CTP2000 Multiservice Interface Module
CTP2000 T1/E1 Interface Module
CTP2000 Compression Module
CTP2000 4WE&M Interface Module
Supervisory Signaling
CTP2000 2W-FXS and 2W-FXO Interface Modules
Required Cables and Pinouts
Analog FXS/FXO Loop-Start Signaling
Answer Supervision
Disconnect Supervision
Analog FXS/FXO Ground-Start Signaling
Digital Signaling
Digital FXS/FXO Loop-Start Signaling
Digital FXS/FXO Ground-Start Signaling
CTP2000 8P-IRIG Interface Module
CTP2000 Clock Interface Modules
External Reference Clock
Installation Notes for Clock Interface Modules
CTP2000 PMC Module
System Specifications
CTP2008 Platform Specifications and Certification
CTP2024 Platform Specifications and Certification
CTP2056 Platform Specifications and Certification
Planning and Preparing the Site
Before You Install a CTP Platform
CTP2000 Environmental Requirements
Equipment Rack Requirements
CTP2000 Rack Requirements
CTP2000 Mechanical Requirements
CTP2000 Space Requirements
CTP2000 Rack Installation
CTP Cabling Recommendations
Cable and Pinout Specifications
CTP2000 4WE&M Interface Connector Pinouts
CTP2000 4WE&M RTM Connector A Pinouts
CTP2000 4WE&M Connector B Pinouts
CTP2000 FXS and FXO Interface Module Cables and Pinouts
Required Cables
RTM Pinout Locations
FXS Connector Pinouts
FXO Connector Pinouts
T1/E1 Interface Module Pinouts
CTP2000 Serial Interface Module Pinouts
CTP2000 Series Console Cable Pinouts
CTP Fast Ethernet and Power Cables
Fast Ethernet Cables
DC Power Cables
General Safety Guidelines and Warnings
CTP Safety Guidelines and Warnings
Module Installation Safety Guidelines and Warnings
Safety Guidelines and Warnings for Installing CTP Modules
Hardware Compliance
Declaration of Conformity for CTP2000 Platforms
Federal Communications Commission (FCC) Statement
FCC Requirements for Consumer Products
Food and Drug Administration, Center for Devices and Radiological Health
Compliance with Canadian Regulations
Industry Canada Notice
Industry Canada Notice CS-03
Avis CS-03 d'Industrie Canada
Canadian Department of Communications Explanatory Notes
DOC Explanatory Notes: Equipment Attachment Limitations
Notes explicatives du ministère des Communications: limites visant les accessoires
Statements of Volatility for Juniper Network Devices
Unpacking and Inspecting the CTP Platform
Before You Unpack the CTP Platform
Unpacking the CTP Device
Inspecting Platform Components and Accessories
If You Detect or Suspect Damage
Contacting Juniper Networks
Installing the Chassis
Before You Install the CTP2000 Platform
Installing the CTP2000 Platform in Freestanding Mode
Special Guidelines for Installing CTP2056 Chassis in a Rack
Installing the CTP2000 Platform in a Rack
Installing Modules
CTP2000 Modules Installation Overview
Protecting CTP2000 Modules and Slots
Required Tools and Safety Items for Installing CTP Modules
Installing a CTP Interface Module, Processor Module, or Clock Module
Removing a CTP Interface Module, Processor Module, or Clock Module
Installing or Removing a CTP2000 Series CompactFlash Card
Installing a PMC on CTP2000 Platforms
Installing and Removing SFPs in a CTP Module
Installing SFPs in a CTP2000 Module
Removing SFPs in a CTP2000 Module
Upgrading Components for Memory Upgrades
Upgrading CTP2000 Series Components for Memory Upgrades
Cabling the CTP2000 Platform Overview
Required Tools, Wires, and Cables for the CTP2000 Platform
CTP2000 Management Ports
Cabling a CTP2000 Interface Module
Cabling the CTP Platform for DC Power
Task 1: Turning Off All CTP Platform Power
Task 2: Connecting the Grounding Cable to the CTP Platform (CTP2056 Platform Only)
Task 3: Connecting the Power Cables to the CTP2000 Platform
Powering On
Before You Power On the CTP2000 Platform
Powering On the CTP2000 Platform
Powering Off the CTP Platform
Accessing the CTP2000 Platform
Setting Up Management Access on the CTP2000 Platform
CTP2000 Console Port Setup
Using HyperTerminal with the CTP2000 Platform
Connecting Directly to the CTP2000 Platform
CTP2000 Platform SSH Setup
Maintaining Components
Required Tools for Maintaining the CTP Platform
Storing CTP Modules and Other Components
Cleaning the CTP Platform
Replacing an AC Power Supply
Replacing Interface Modules Using Hot-Swap
CTP2000 Hot-Swap Interface Module Replacement
Product Reclamation and Recycling
Product Reclamation and Recycling Program
Replacing Fan Trays
Removing a CTP2000 Fan Tray
Installing a CTP2000 Fan Tray
Packing and Returning Hardware
Return Procedure
Returning CTP Products for Repair or Replacement
Troubleshooting Power Failures
CTP Platform Does Not Power On
CTP Platform Shuts Down
Contacting Customer Support
Contacting Customer Support
Locating CTP Component Serial Numbers
Information You Might Need to Supply to JTAC