Access the Device Using SSH
After you have configured an IP address for the CTP151 device, you can run SSH from a remote host to access the device through its Ethernet port. To connect the Ethernet port to the network:
- Connect an Ethernet RJ-45 cable to the Ethernet port on which you configured the IP address on the front panel of the CTP151 chassis.
- Connect the other end of the cable to the appropriate Ethernet network for an out-of-band connection.
Do not change the IP address for the Ethernet interface that you are using to communicate with the device. If you change the address, you will lose the SSH session.
The SFP+ ports are not functional in CTPOS 9.1, CTPView 9.1, and earlier releases.