Cabling a CTP151 Interface Module
To install a cable in an interface module:
- Wrap and fasten one end of the ESD grounding strap around your wrist and connect the other end to a site ESD point.
- For the T1/E1 interface module, slide the cable as far
as you can into the T1/E1 interface module until it clicks into place.
For the serial/multiservice interface module, push the serial HD-26 cable into the module, and tighten the thumb screws.
- Gently pull the cable to confirm that it is inserted correctly.
For more information about CTP151 cable and pinout specifications, see Cable and Pinout Specifications.