Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
ContentIndex
  
[+] Expand All
[-] Collapse All

 A  C  D  E  H  I  J  M  P  R  S  T  U  V

 

A

accessing    
connecting directly
console ports
HyperTerminal
management console
SSH setup
 

C

cabling    
fast Ethernet    12
overview
power    12
recommendations
required tools
Case Manager, Juniper
cleaning platform
compliance, regulatory    
Canadian
FCC    12
FDA
console     See management console    
CTP overview
CTP1002 platform    1
specifications
CTP1004 platform    1
specifications
CTP1012 platform    1
specifications
CTPOS
CTPView
customer support    1
contacting Juniper
information needed
locating serial numbers
return procedure    12
 

D

damaged components, returning
DB-25 connector    12
DB-9    
connector
crossover cable
declaration of conformity, EC    
CTP1000
 

E

EIA-530 data interface
EIA530(A) data interface
environmental requirements
 

H

HyperTerminal access
 

I

inspecting before installation
installing    
before
freestanding
responsibilities
interface modules    
pinouts     See pinouts    
 

J

JTAC, contacting    12
 

M

maintaining    
cleaning
storing modules
tools required
management console    
accessing
direct connection
pinouts
port setup
modules and components    
cleaning
replacing
storing
 

P

pinouts    
100-pin connector
power    
cables, DC    12
failures
shutdowns
powering off
powering on    12
preinstallation responsibilities
 

R

rack    
installation guidelines
installing in
mechanical requirements
requirements
space requirements
reclamation and recycling
replacing components
return procedure    12
RJ-45 connector    123456
RS-232 port    123456
 

S

safety guidelines
serial number, locating
SSH connection
storing components
 

T

technical support
troubleshooting power failures    12
 

U

unpacking and inspecting
 

V

V.35 data interface

CTP1012 Platform Specifications and Certification

Table 3: CTP1012 Platform Specifications

Category

Specification

Weight 

Chassis only

14 lb (6.35 kg)

Dimensions 

Chassis only

1.75 in. (4.44 cm) high

17.25 in. (43.81 cm) wide

17.25 in. (43.81 cm) wide

Environmental Requirements 

Ambient operating temperature

32° to 104° F (0° to 40° C)

Ambient operating humidity

5% to 90% (noncondensing)

DC Input

N/A

AC Input 

Power required

100–132 VAC

100–240 VAC

AC line frequency

50–60 Hz

Nominal current (115V amps)

1.5

Power

150 W

Space Requirements

3 ft. (90 cm) behind device or rack.

Do not block air vents on the front or back of the device.

Airflow

Air intake occurs from the front of the device.

Air is exhausted out the back of the device.

Safety Agency Certification
  • AS/NZS 60950:2000 Safety of Information Technology Equipment
  • CAN/CSA-C22.2, No. 60950-1–03, First Edition, Information Technology Equipment - Safety - Part 1: General Requirements
  • EN60825-1, Safety of Laser Products - Part 1: Equipment Class, Requirements, and User's Guide (2001)
  • EN 60950-1:2001, First Edition, Information Technology Equipment - Safety - Part 1: General Requirements
  • IEC 60950-1(2001-10) Ed. 1.0 Information Technology Equipment - Safety - Part 1: General Requirements
  • Low Voltage Directive (2006/95/EC)
  • UL 60950-1, First Edition, Information Technology Equipment - Safety - Part 1: General Requirements
Electromagnetic Emissions Agency Certification
  • AS/NZS CISPR 22:2004
  • EMC Directive (89/336/EEC)
  • EN 300 132–2 (Narrowband and Wideband)
  • EN55022 Class A (CISPR-22 Class A)
  • EN55024, Annex C for WAN Equipment Performance Criteria A, B, and C
  • EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-6
  • ETSI 300-386, Telecommunication Network Equipment; ElectroMagnetic Compatibility (EMC) requirements
  • IECS-03 Issue 3 Class A
  • FCC Part 15 Class A
  • VCCI (Voluntary Control Council for Interference by Information Technology Equipment)

Related Documentation

Modified: 2015-11-22