Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
ContentIndex
  
[+] Expand All
[-] Collapse All

 A  C  D  E  H  I  J  M  P  R  S  T  U  V

 

A

accessing    
connecting directly
console ports
HyperTerminal
management console
SSH setup
 

C

cabling    
fast Ethernet    12
overview
power    12
recommendations
required tools
Case Manager, Juniper
cleaning platform
compliance, regulatory    
Canadian
FCC    12
FDA
console     See management console    
CTP overview
CTP1002 platform    1
specifications
CTP1004 platform    1
specifications
CTP1012 platform    1
specifications
CTPOS
CTPView
customer support    1
contacting Juniper
information needed
locating serial numbers
return procedure    12
 

D

damaged components, returning
DB-25 connector    12
DB-9    
connector
crossover cable
declaration of conformity, EC    
CTP1000
 

E

EIA-530 data interface
EIA530(A) data interface
environmental requirements
 

H

HyperTerminal access
 

I

inspecting before installation
installing    
before
freestanding
responsibilities
interface modules    
pinouts     See pinouts    
 

J

JTAC, contacting    12
 

M

maintaining    
cleaning
storing modules
tools required
management console    
accessing
direct connection
pinouts
port setup
modules and components    
cleaning
replacing
storing
 

P

pinouts    
100-pin connector
power    
cables, DC    12
failures
shutdowns
powering off
powering on    12
preinstallation responsibilities
 

R

rack    
installation guidelines
installing in
mechanical requirements
requirements
space requirements
reclamation and recycling
replacing components
return procedure    12
RJ-45 connector    123456
RS-232 port    123456
 

S

safety guidelines
serial number, locating
SSH connection
storing components
 

T

technical support
troubleshooting power failures    12
 

U

unpacking and inspecting
 

V

V.35 data interface

CTP1002 Platform Specifications and Certification

Table 1: CTP1002 Platform Specifications

Category

Specification

Weight 

Chassis only

6 lb (2.72 kg)

Dimensions 

Chassis only

1.75 in. (4.44 cm) high

8.0 in. (20.32 cm) wide

12.5 in. (31.75 cm) deep

Environmental Requirements 

Ambient operating temperature

32 to 104° F (0 to 40° C)

Ambient operating humidity

5% to 90% (noncondensing)

DC Input

N/A

AC Input 

Power required

100–240 VAC

AC line frequency

50–60 Hz

Nominal current (115V amps)

<1.0

Power

100 W

Space Requirements

3 ft. (90 cm) behind device or rack.

Do not block air vents on the front or back of the device.

Airflow

CTP 1002 is fanless.

Safety Agency Certification
  • AS/NZS 60950:2000 Safety of Information Technology Equipment
  • CAN/CSA-C22.2, No. 60950-1–03, First Edition, Information Technology Equipment - Safety - Part 1: General Requirements
  • EN60825-1, Safety of Laser Products - Part 1: Equipment Class, Requirements, and User's Guide (2001)
  • EN 60950-1:2001, First Edition, Information Technology Equipment - Safety - Part 1: General Requirements
  • IEC 60950-1(2001-10) Ed. 1.0 Information Technology Equipment - Safety - Part 1: General Requirements
  • Low Voltage Directive (2006/95/EC)
  • UL 60950-1, First Edition, Information Technology Equipment - Safety - Part 1: General Requirements
Electromagnetic Emissions Agency Certification
  • AS/NZS CISPR 22:2004
  • EMC Directive (89/336/EEC)
  • EN 300 132–2 (Narrowband and Wideband)
  • EN55022 Class A (CISPR-22 Class A)
  • EN55024, Annex C for WAN Equipment Performance Criteria A, B, and C
  • EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-6
  • ETSI 300-386, Telecommunication Network Equipment; ElectroMagnetic Compatibility (EMC) requirements
  • IECS-03 Issue 3 Class A
  • FCC Part 15 Class A
  • VCCI (Voluntary Control Council for Interference by Information Technology Equipment)

Related Documentation

Modified: 2015-11-22