Navigation
Back up to About Overview
[+] Expand All
[-] Collapse All
A
C
- cabling
- fast Ethernet 1, 2
- overview
- power 1, 2
- recommendations
- required tools
- Case Manager, Juniper
- cleaning platform
- compliance, regulatory
- console See management console
- CTP overview
- CTP1002 platform 1
- CTP1004 platform 1
- CTP1012 platform 1
- CTPOS
- CTPView
- customer support 1
- contacting Juniper
- information needed
- locating serial numbers
- return procedure 1, 2
D
- damaged components, returning
- DB-25 connector 1, 2
- DB-9
- declaration of conformity, EC
E
H
I
- inspecting before installation
- installing
- interface modules
- pinouts See pinouts
J
M
- maintaining
- management console
- modules and components
P
- pinouts
- power
- powering off
- powering on 1, 2
- preinstallation responsibilities
R
S
T
- technical support
- troubleshooting power failures 1, 2
U
V
Download This Guide
Related Documentation
CTP1012 Platform
The CTP1012 platform is a 1-U high, full-rack wide chassis designed for tabletop or shelf installation. It can also be installed in a rack with the supplied rack-mounting kit. The CTP1012 device does not have any removable interface modules, but does use a removable Type II CompactFlash card and is available in an AC-powered version. It has multiple cooling fans, and airflow is front to back. See Figure 7 and Figure 8.
Figure 7: CTP1012 Platform (AC Version, Front View)
The front panel comprises the following components (see Figure 7):
- Power LED—Green when power is connected and the power switch is set to the ON position.
- HDD LED—Red when the flash card is in use.
- Front power switch—Set to ON position when 1 is briefly pressed. Set to OFF when 1 is pressed for four or more seconds.
- Removable flash card—The device must be powered off when you insert or remove the flash card.
- USB ports.
The rear panel comprises the following components (See Figure 8):
- Power supply—Uses a standard IEC power cord.
- Ethernet connection—Provides the 100-Mbps Ethernet connection to the IP network by means of a local Ethernet switch or router.
- Console connection—Provides an asynchronous TTY connection for locally configuring the CTP device. See CTP1000 Console Cable Pinouts to find pinout information for this connector.
- Interface connector—Features a 100-pin connector providing four serial interfaces when used with the CTP quad cable. SeeCTP1000 Interface Module 100-to-25-Pin Cable Pinouts to find pinout information for this connector.
- USB ports.
Figure 8: CTP1012 Platform (AC Version, Rear View)
