Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

OPS Equipment

 

The Optical Protection Switch is ordered as a kit, which includes the chassis, redundant DC power, a control card, a switch card, and mounting brackets and cables (Table 1):

Table 1: Optical Protection Switch Kit - Dual Switch Card (BT7A39AS)

Component

Quantity in Kit

Component PEC

OPS 1RU chassis

1

BT7A39AA

OPS 1+1 module pluggable

1

BT7A39AB

OPS system control card

1

BT7A39AC

OPS power card

2

BT7A39AP

OPS accessories kit (includes mounting brackets and DC power cables)

1

BT7A39AD

Equipment for AC operation is ordered separately (Table 2):

Table 2: AC Power and Power Cables

Component

Component PEC

Notes

OPS AC power unit

BT7A39AE

The OPS AC power unit takes AC input and provides DC output to the OPS power card (BT7A39AP) over a DC power cable (included). The AC power cable is not included and must be ordered separately.

Two units are required per OPS (one unit for each OPS power card (BT7A39AP)).

1.5 meter AC Power Cord with North American Plug

BP1A58GA

Plug (to power source): NEMA 5-15

Connector (to chassis): IEC 60320 C13

Two cables are required per OPS (one cable for each OPS AC power unit (BT7A39AE)).

1.5 meter AC Power Cord with European Plug

BP1A58HA

Two cables are required per OPS (one cable for each OPS AC power unit (BT7A39AE)).

1.5 meter AC Power Cord with UK Plug

BP1A58JA

Two cables are required per OPS (one cable for each OPS AC power unit (BT7A39AE)).

1.5 meter AC Power Cord with Australian Plug

BP1A58KA

Two cables are required per OPS (one cable for each OPS AC power unit (BT7A39AE)).